Our News

  • Show All
  • Reports
  • Software
  • General
  • In the Press
  • Events, Trade Fairs
Have you seen our new feature Offset Table for CNC Code Generation Tree?

Offsets for materials or surface treatments can be specified in the table and will then be automatically applied to all mortises, pockets, and drilling holes.

read more
Student intern Tilman E. joins the development team

Tilman E. is supporting our development team as part of a two-week student internship.

read more
Welcome to the Team: René Mischel Begins His Apprenticeship as an IT Specialist in Application Development

René joined our team in October as an apprentice IT specialist in application development.

read more
Compass Software celebrates summer party

Compass Software organized a summer party in the middle of September.

read more
Extension Open Stringer with Shadow Gap

With Compass Software it is now possible to add a shadow gap to open stringers to create an assembly gap between the tread edge and the wall.

read more
Martin Stockhausen at stair conference at customer Melby in Norway

Martin Stockhausen attended an exclusive staircase conference organised by C.Dahm Maskinforrenting AS in Norway at the beginning of September.

read more
Have you seen our network solution?

Our network solution enables seamless data management through a centralized database that allows easy access from multiple stations.

read more
Successful SEMA and Compass Software Showcase at IWF 2024 in Atlanta

SEMA and Compass Software made a strong impact at IWF 2024 in Atlanta, showcasing their latest BIM and CAD/CAM solutions.

read more
“Connection Tenon / Mortised” Operation with Precutting for Stringers

It is now possible to use pre-cutting for the " Connection Tenon / Mortised " stringer operation.

read more
Compass Software Trainee Jonas Completes His Training

Our trainee, Jonas Knoefel, has successfully completed his apprenticeship as an IT specialist in application development.

read more
dds Magazine Reports on Our Case Study at Hafrsfjord Stairs

Norwegian Stair Builder Hafrsfjord has been using Compass Software to optimise their production for about 30 years.

read more
Extension of Panels and Glass Infills in Railings

The patterns contained in the articles 00133402 CAD Railing Infill and 00133403 CAD/CAM Railing Infill for panels and glass infills in railings have been extended. The distance between the patterns…

read more
Have you seen our option Bolted Staircase?

Bolt stairs are characterized by their sleek and modern design that creates a floating appearance by using bolts or pins to support the treads.

read more
Copying and Deleting Stairs within a Run

It is now possible to copy and delete stairs within a run.

read more
Partnership Strengthened: SEMA Employees Trained at Compass

Christian Schmalholz and Devin Musak from our partner company SEMA visited the Compass Software headquarters in Dortmund this week.

read more
Visit to Our Long-Time Partner Erwin Kamp in the Netherlands

Sales representative Hermann Hasebrink and dealer representative Wiktoria Rakowska visited our Dutch dealer Erwin Kamp to discuss current developments.

read more
Compass Software visits sales partner in France

Our sales representative Martin Stockhausen and dealer representative Wiktoria Rakowska recently visited our valued distributor TACT Conseil in Saverne, France.

read more
Have you seen our Option CAM/CNC 3 Axis Wreath?

With this unique technology, stringer and handrail wreaths can be produced accurately on machines with only 3 axes.

read more
Automatically Adding the Total Length of Rubber Grooves in Parts Lists

In the parts lists, it is now possible to automatically add the lengths of the rubber grooves using the " Display Total " function.

read more
Customer visit at Schmidt Treppen

Recently, our sales representative, Martin Stockhausen, paid a visit to our long-term customer, Schmidt Treppen, located in Reinholterode, Thuringia.

read more
View of Nesting Plate Utilisation

There are now three different ways to view the usage of nested plates.

read more
Xylexpo 2024

Compass Software exhibited at the SCM booth at the Italian Xylexpo trade fair in Fieramilano on 23/05/2024.

read more
Materials and Finishes Show 2024

Our sales representatives exhibited at the Materials & Finishes Show in Birmingham from May 19. - May 22, 2024.

read more
Dynamic Flange Function Optimised

For our customers who work with metal stringers, such as flat steel stringers, we have extended and optimised the dynamic flange function.

read more
Have you seen our option Flat Steel Stringer?

The Flat Steel Stringer option can be used to create stairs with steel stringers on the sides.

read more
New: "Freeze" Height Construction

In Compass Software, it is now possible to freeze the height construction so that the run parts remain unchanged when modifications are made to the floor plan.

read more
10. International Stair Congress

Sales representative Hermann Hasebrink gave a presentation at the Wood Construction Conference at the Biberach Training Center.

read more
Compass Software and SEMA at IKORO

Compass Software and SEMA exhibited at the IKORO Fair in Rosenheim on April 24, 2024.

read more
HOMAG Technology Days

Sales Representative Martin Stockhausen exhibited at the HOMAG Technology Days on the topic of building component manufacturing on April 16. and 17, 2024.

read more
Case Study at Compass Software customer Hafrsfjord Tre A/S in BM Magazine

The BM magazine reports on our customer Hafrsfjord Tre A/S, who has been utilizing an automatic warehouse with connected nesting, in their April 2024 issue.

read more
Machine Files in CS Database in the Network

Did you know that Compass Software machine files are now stored in the CS database on the network? 

read more
45° Mitre Joint for Riser-Stringer-Connection

With Compass Software it is now possible to cut mitre joints for riser connections at 45° angles, which will be of particular interest to our American and English customers.

read more
Holz-Handwerk 2024

Our team once again exhibited at this year's Holz-Handwerk in Nuremberg. We would like to thank all visitors.

read more
dds Magazine Reports on Trade Show Offerings at the Holz-Handwerk 2024

Compass Software was published in the March edition of the dds magazine with a feature on the Holz-Handwerk 2024.

read more
BM Magazine Reports on Our Trade Show Presentation at the Holz-Handwerk

The BM Magazine is reporting on Compass Software's trade show presentation at the Holz-Handwerk that is happening from March 19. - 22. in Nuremberg.

read more
Milling Glass Grooves with Rounding

With Compass Software it is now possible to process glass grooves with a rounding.

 

read more
“Split” Landings and Treads in the Order Tree

Treads and landings can be split into two or more parts in the order tree using the "Split" function.

read more
Drilling Patters and Predefinitions Export/Import

Drilling patterns and predefinitions can be transferred on request when exporting and importing CS stairs.

read more
Plate Optimisation 2.0: Selecting Position for Parts

With Compass Software, it is now possible to arrange parts even more individually in Plate Optimisation 2.0.

read more
Have you seen our module In-Situ Concrete?

It makes the design of coverings for existing on-site concrete cores possible.

read more
Processing Rabbet in Riser

It is now possible to process risers that are connected to the tread by a tenon with Compass Software.

read more
Calculation of Glass Grooves in Well Slats

With Compass Software it is now also possible to design glass grooves in well slats.

read more
Brilliant start into the new year: BuildTec Software Group and GLASER Programmsysteme join forces in newly formed partnership

Wildpoldsried / Hanover, 31 January 2024 - Only three months after the successful formation of the BuildTec Software Group ("BuildTec"), a growing European platform for innovative software solutions…

read more
External Stair: New Drillings and Table Arrangement for Risers

We have extended the option External Stair. Additional drillings are possible and the risers can be created as table arrangements.

read more
Compass Software visits sales partners in Poland

Sales representative Hermann Hasebrink and dealer representative Wiktoria Rakowska visited our dealers in Poland.

read more
New Processing Step for the Front Side Processing of Risers with Mortises

The new “cutting 5 axis with double bevel trim cutter” processing step for the front edge processing of mortised risers saves an enormous amount of time, and the result is completely tear-free.

read more
Visit at the Berufskolleg Beckum

Employees Hermann Hasebrink and Sebastian Baecker presented Compass Software at the Berufskolleg (Technical College) Beckum.

read more
Cozy Christmas party at Compass Software

The Compass Software team ended the year with a fun Christmas party.

read more
New partnership for Customer De Vries with Compass Software and RCD Stair Systems

Long-time customer De Vries Trappen begins a new partnership with RCD Stair Systems, whose system stairs are fully integrated with Compass Software.

read more
Entering Tread Thickness when Freezing Concrete Core

It is now possible to enter the tread thickness when freezing the concrete core, as is possible with risers.

read more
BM-Magazine Publishes Compass Software's Case Study on CPI Trappen

Our case study on the Dutch stair builder CPI Trappen on the topic of "Nesting without Nesting Machine with Plate Optimisation 2.0" was published by the German BM-Magazine in December.

read more
Dowels & Lamellos in Baluster-Run Part Connection Positioned Freely

Dowels and lamellos that are positioned either on top of a run part or below a run part can now be placed freely.

read more
International Timber Forum in Innsbruck

The Compass Software team and SEMA exhibited at the 27th International Timber Construction Forum (IHF) in Innsbruck at the end of November.

read more
Visit at Our Long-Term Customer Hagen in Norway

Compass Software representative Martin Stockhausen visited our customer Hagen A/S in Norway in November.

read more
Ticket System Extended: Direct Request to Dealers

International Compass Software customers who are supported by a local dealer can now submit service requests directly to their dealer through the Compass ticket system.

read more
Limits Possible in Online Configurator and Winding Details Optimised

It is now possible to set limits in the online stair configurator, e.g., minimum and maximum tread width, rise, etc. The winding details have also been optimised.

read more
Bregal Unternehmerkapital Announces the Formation of BuildTec Software Group and Newest Partnership with E-Komplet

Wildpoldsried / Aalborg / Monheim / Dortmund, 22.11.2023 – With the assembly of iconic construction technology brands such as SEMA Software (“SEMA”), Compass Software (“Compass”), WGsystem, and…

read more
HOB Magazin reports on Compass Case Study Hafrsfjord

The German magazine HOB reported on the Compass Software case study about the Norwegian company Hafrsfjord in November.

read more
Have you seen our module Folded Staircase yet?

The module is ideal for the design of folded stairs with straight (90°) or angled risers.

read more
Set-up of Second Machine for Customer Escanor

Our French customer Escanor has been using the Compass staircase software for 20 years. At the end of October, service manager Gereon Max installed a second machine on site.

read more
New: License Status Query and Requests for 3D Plus Online

We have extended the upload dialog for the option 3D Plus Online. Now, customers can check their license status and request additional stair contingents immediately.

read more
3D Plus and 3D Plus Online for Software Support Customers

All customers with a software support contract who also have a network license will receive the options 3D Plus and 3D Plus Online with their next license key update that is sent out with their…

read more
Company function at SEMA Software in Wildpoldsried: An event full of enthusiasm and team spirit!

Our Compass Software team attended a two-day SEMA meeting in Wildpoldsried, Germany in mid-October. This event was more than just a company event - it was a celebration of inspiration and…

read more
Wood Building Forum Cologne 2023

Compass Software once again exhibited at the 16. European Congress of the Wood Building Forum in Cologne. The topic: "efficient building with wood in urban spaces".

read more
Mikado Magazine Reports on OBJ Export with Compass Software

The German mikado magazine reported on the Compass Software Export in OBJ format that is used for augmented reality apps, 3D printing, and 3D display in their October issue.

read more
Have you seen our module Plate Optimisation 2.0?

Plate Optimisation 2.0 is the perfect module for nesting of stair parts and BTL components.

read more
Intuitive Access to Tread Details in Compass Software

We have improved the way treads are selected. The user can intuitively select treads by simply clicking on the tread number.

read more
CAM/CNC Tandem Machine with Two Units at Long-Term Customer ARU Grupp AS

Technician Salvatore Gandolfo has completed the installation of a tandem machine with two aggregates on one Y-axis at our customer ARU Grupp.

read more
Dynamic Flange Parallel to Tread Edge

We have expanded the dynamic flange option to include the ability to set the flange “parallel to the tread edge.”

read more
"Additional Information" Field in 3D Plus Online Optimised

We have optimised the text field in 3D Plus Online, so that it now appears on the right side of the 3D image and no longer obstructs the view of the stair.

read more
HOB Magazine Reports on Compass Customer Verschaeve

The HOB magazine's article features the success story at Trappen Verschaeve, who use a robot to save manpower and create more capacity on other machines.

read more
Balusters Possible in 1:1 Output

It is now possible to export balusters as a 1:1 template.

read more
Slanted Drillings at Exit for Z-Risers on Open Stringers

Compass Software users can now create slanted drillings in the exit tread for z-risers on open stringer stairs.

read more
Machine Installation at Customer HTM Tischlerei GmbH

Compass Software installed a replacement Homag CNC machine at customer HTM Tischlerei after a workshop fire.

read more
Have you seen our module tread coverings?

This module calculates tread coverings for all treads, which can be used as protection during construction and as packaging for transport.

read more
Intermediate Posts in Balcony Railing Now Have Their Own Drilling Pattern

Intermediate posts in balcony railings can now be assigned their own drilling pattern.

read more
5-Axis Machine Installation at Signature Woodcrafters

At the beginning of August, service technician Salvatore Gandolfo installed a Homag CNC machine with Compass Software at long-time customer Signature Woodcrafters.

read more
CAD training at long-time customer Feil Inc.

Service technician Salvatore Gandolfo visited customer Feil in Florida for a one-day CAD training.

read more
Railing Infills now Visible in 3D Cut Drawing Window

Railing infills are now also visible in the 3D cut drawing window.

read more
Klaus Eilers Leaves the Company After 30 Years of Dedicated Service

After 30 years of tireless dedication, our long-time head of sales, Klaus Eilers, is leaving Compass Software.

read more
Have you seen our module space saver stair yet?

Straight or spiral space saver stairs are designed with half-sided alternating treads.

read more
Work Process Smooth Entire Mortise for Stringers Now with Offset

It is now possible to define a lateral offset in the work process “smooth entire mortise” for stringers.

read more
Export Name for Folders in Online-Stair-Configurator

Folder names from the stair software are now automatically applied to folders in the stair configurator.

read more
OBJ Export for Augmented Reality and More

Compass Software makes it possible to export stairs in OBJ format for AR apps, 3D printing, and 3D display.

read more
Drilling Pattern for Base Rails on Balconies

It is now possible to assign drilling patterns for base rails in the height construction of the balcony railing.

read more
Cuboids Considered for Calculation of Headroom

Cuboids are now included in the calculation of the headroom.

read more
Have you seen our module tread shaped stringers yet?

The feature makes it possible to design stringer contours parallel to the treads.

read more
Longstanding Dealer Falkenberg Visits Compass

Long-time Compass Software dealer Tjark Busch from the Norwegian company A. Falkenberg visited us to receive various trainings at the end of June.

read more
CSV Export from Compass Software

Did you know it is easy and fast to export lists from forms in CSV format from Compass Software?

read more
Compass Software & Stair Academy Cooperate for Better Transfer of Knowledge

Compass Software’s ongoing efforts to improve knowledge transfer in the stair building industry will now be supported by a new partnership with the German online portal Treppenakademie (Stair…

read more
Stair Configurator: New Value Field with Graphic

The Stair Configurator forms have been extended: It is now possible to insert the standard graphic of the stair type and a caption in the form.

read more
Have you seen our interfaces to various external systems yet?

Compass Software makes the transfer of stair designs to other software easy and fast.

read more
Visit at Snekker Stefan AS in Norway

Sales representative Martin Stockhausen visited our longstanding customer Snekker Stefan AS in Norway at the end of May.

read more
Larger Pockets for In-Situ Concrete Stairs

Compass Software users with the module “In-Situ Concrete” can cut the pockets on the underside of concrete tread covers larger starting with the new version.

read more
LIGNA 2023

The Compass Software Team exhibited at the LIGNA show in Hanover last week.

read more
Setting “Apply to every 2. Tread” for Space Saver Stairs

There is a new setting for space saver stairs: “Apply to every 2. tread”, which makes it possible to apply tread front edge details to only every 2. tread of a stair.

read more
Processing Risers in Nesting

It is now possible to process risers during nesting.

read more
Milling Pockets for Open Stringer Plates in Stringer Contour

It is now possible to mill plates for open stringers vertically into the stringer. The pockets for the stringer plates can be added to the drilling patterns of the tread and inserted into the stringer…

read more
Extension Panels on top of Exit Stringer

The option panels/Dry-wall underneath a staircase has been extended: It is now possible to also add panels on top of the exit stringer.

read more
Enhancement for the Calculation of Cut Offs on Glass Infills

The calculation of grooves for glass infills in railing parts has been improved.

read more
Work Process Re-Milling Tread Contour with Separate Speed

The work process: “re-mill contour” for treads has been extended and it is now possible to select an independent speed when smoothing tread contours.

read more
General Manager Milena Schaefer at SMA Annual Conference

General Manager Milena Schaefer from our US Branch, Compass Software Inc., attended the Stairbuilders and Manufacturer's Association (SMA) Annual Conference last week.

read more
New Settings in Work Process for Sawing of Post Heads

There is a new setting in the work process for sawing post heads:

read more
Compass Software at the BAU Munich

Compass Software exhibited together with SEMA Software at the BAU Munich, the world's leading trade fair for architecture, materials, and systems, this year.

read more
Automatic XML Interface for ERP Systems

The XML interface between Compass Software and various ERP Systems has been extended: It is now possible to import data automatically without manual work.

read more
Compass Software with SEMA at IKORO Fair in Rosenheim

CEO Lukas Hollinderbaeumer is at the IKORO in Rosenheim together with our partner SEMA Software.

read more
New Training Location in the Karlsruhe Area

Do you live close to Karlsruhe, Germany? If so, it is now possible to book Compass Software training in the König von Preussen Hotel, near Karlsruhe.

read more
Compass Software with SEMA at Mass Timber Conference

Our Compass Software Inc. General Manager Milena Schaefer visited the Mass Timber Conference in Portland, OR together with the SEMA Group last week.

read more
Customers Visit Customers: Vitaby Snickerifabrik at Hokon

Compass Software customer Vitaby Snickerifabrik AS from Sweden visited our German customer Hokon in mid-March.

read more
New Processing Steps Finishing and Roughing of Front Side

There are two new processing steps for the machining of wreath front sides.

read more
Have you seen our extensions for the 3D display of stairs?

Our modules 3D Plus Online and the photo-realistic 3D visualisation offer different possibilities to expand the 3D display of stairs.

read more
Compass Software Service Workshop

Compass Software organised their semi-annual service workshop in late February. The service team participated in different workshops to learn more about the newest software developments and gain…

read more
Presentation “Digitalisation and Automation” at the German Stair Building Days

CEO Lukas Hollinderbaeumer held a presentation on the topic of digitalisation and automation in stair building at the German Stair Building Days, organised by the German Association for Stair and…

read more
Extension Folders for Forms

All Compass Software users with the current release version can now consolidate different forms into a so-called folder in the template tree.

read more
Trainee Hong Tram Pham Completes Apprenticeship Half a Year Early

Our trainee Hong Tram Pham has completed her apprenticeship to become an IT Specialist with a Focus on Application Development half a year early in late January.

read more
Training Possibilities at our Branch South-Germany

Did you know that we also offer training at our office in Bad Endorf (district Rosenheim, Germany)?

read more
Have you seen our modules Barcode and Table Arrangement?

The modules Barcode and table arrangement can be utilised individually or together for significantly more efficiency.

read more
New for Processes for Routing Railing Parts Upright

There are new work processes for the upright routing of railing parts: different drillings for floor screws and new settings when sawing front sides.

read more
dds Magazine reports on MES Solution at Compass Software customer Alber Stairs

The German dds magazine published a large article on the implementation of our MES solution at customer Alber Treppensysteme GmbH in their February 2023 edition.

read more
SEMA Management and Compass Software Team Are Getting to Know Each Other

A lively exchange was accomplished during a visit of the SEMA Group management team at the Compass Software headquarter.

read more
Material Thickness for Tread Coverings

There is a new option for tread coverings that considers the material thickness of the protective covering.

read more
Ludger Ostendarp Appointed as Second Executive Director

Compass Software, one of the leading specialists for CAD/CAM stair building software and CAM/CNC timber solutions, has appointed a second executive director.

read more
Compass Software announces takeover

Compass Software, one of the leading specialists in CAD/CAM/CNC software for stair building, CAM timber and CAM window processing, announces its acquisition by the SEMA Group.

read more
Compass Software Customer Hafrsfjord from Norway Visits Alber Stairs in Germany

We accompanied our Norwegian customer Hafrsfjord Tre A/S during a visit to Alber Treppensysteme, where they were able to take a closer look at the implementation of our MES solution PROKON and other…

read more
Have You Seen Our Feature Calculation?

The module Calculation is used to calculate the cost of your staircase quickly and easily. You will always stay on top of your expenses.

read more
Compass Software Christmas Party

The Compass Software team gathered for a Christmas party last week at the Dortmund headquarter.

read more
Have You Seen Our Features External Stair and External Stair Plus?

The extension External Stair lets Compass Software users import external DXF tread data into the stair software.

read more
Stair of the Year 2022

The stair expert portal Treppen.de has selected the stairs of the year 2020. Several Compass Software customers have been awarded.

read more
FORUM WOOD BUILDING International

Compass Software exhibited at the FORUM WOOD BUILDING in Innsbruck. From Nov. 30. to Dec. 2, 2022 the event revolved around the topic Practical experience – Practical application.

read more
130 Years Falkenberg

We congratulate our Norwegian dealer A. Falkenberg Eftf. AS on their 130. anniversary. Compass Software has been working closely together with the Norwegian machine dealer since the beginning of our…

read more
A Visit at Customer Vitaby Snickerifabrik in Sweden

The Compass Software Team visited customer AB Vitaby Snickerifabrik in Sweden. We've enjoyed the meeting!

read more
Compass Software Visits Longtime Customer ATAB in Sweden

The Compass Software management team, consisting of Lukas Hollinderbaeumer and Ludger Ostendarp, as well as sales representative Martin Stockhausen, is currently visiting our longtime customer ATAB…

read more
CNC Machine Installation for New Customer Fichtl Holz.Hand.Werk.

Compass Software service technician Christian Axtmann installed a new Biesse Rover A 1556 with 5 axes at our new customer Fichtl from Germany.

read more
Compass Software at the Beckum Technical College

Sales representative Hermann Hasebrink introduced students of a wood technology class to the Compass Software program.

read more
Machine Installation at Customer Schreppel

The Compass Software support installed a new 5 axis Biesse machine to replace a 22-year-old 4 axis Homag at longtime customer Schreppel from Bavaria, Germany.

read more
Have You Seen Our Feature CAD/CAM Light?

With this feature Compass Software users can place difference light spots or light strips in stairs.

read more
Compass Software at the Vietnamwood 2022

Compass Software exhibited at the Vietnamwood in Ho Minh City from October 18 - 21 for the first time.

read more
HOB Magazine Reports on Compass Customer Taglieber

The HOB magazine's article features the success story at Taglieber. The company is manufacturing stairs with Compass Software, as well as complicated post-and-beam constructions for building facades.

read more
Forum Wood Building Urban Cologne

Compass Software exhibited at the "FORUM HOLZBAU" from October 19 - 20, 2022.

read more
Online Training at Compass Software

Much of Compass Software’s training has been taking place online for some time now. This affords participants extra flexibility.

read more
Working Student Jonas Wotzlawski Completed his Bachelor’s Degree

We congratulate our working student Jonas Wotzlawski for completing his bachelor.

read more
IWF 2022 in Atlanta

The IWF trade show in Atlanta was finally held in person again after a 4 year break. Compass Software Inc. was there with their own booth.

read more
Obituary Detlef Hollinderbaeumer

We are mourning our long-time CEO Detlef Hollinderbaeumer.

read more
The Holz-Handwerk 2022 Was A Success

Our team exhibited at the Holz-Handwerk in Nuremburg from July 12. -15, 2022.

read more
Gereon Max Accomplishes an Impressive Result at the Kamen Duathlon

Gereon Max competed in the sprinting distance at the Duathlon (running – bike – running). He was able to win the age group M50 despite the rain and wind he had to face.

read more
dds Reports: Compass Software Trade Show News

In July, the industry magazine dds reported on Compass Software's innovations, which will be introduced at the Holz Handwerk 2022.

read more
Flexijet-Workshop at Compass Software Headquarter in Dortmund

Our business partner Flexijet held a workshop at our office in Dortmund at the beginning of the week.

read more
Designing Model T-Stairs

It is now possible to design model T-stairs with Compass Software.

read more
Fixed Distance Between Stringer and Wall and Centred Handrailing

It is now possible to define a fixed distance between the stringer and wall. Changes to the stringer thickness – manually or by changing the material thickness – do not affect the distance between the…

read more
Door Production on All Customary CNC Machinery

It is now possible to manufacture doors with Compass Software.

read more
Handrail over Centre Post

It is now possible to design a handrail over the centre post. The centre post and the handrail can be connected with a spacer.

read more
Additional Features in Material and Surface Treatment Forms

The value fields in the material and surface treatment forms have been extended to include additional options.

read more
HPL-/Steel Stair: Stringer Visible During Handrail Design

It is now possible to display stringers of HPL and steel stairs during the handrail design in the height construction.

read more
Extension of the XML Interface to Stromab Saws and New Quick Tips in Menus

There are now additional functions when exporting XML data to Stromab saws.

read more
Ceiling Structure Visible in Front Board

The ceiling structure (flooring, screed, ceiling) is now displayed in the height construction of the front board.

read more
Additional Drilling Pattern Information in Height Construction

The drilling pattern information (name, assignment, etc.) have been extended and are now significantly clearer.

read more
Abdullah Orabi Successfuly Completes Apprenticeship

We congratulate Abdullah Orabi for completing his apprenticeship.

read more
Extended Options for External Staircases

External staircases which are imported through DXF or WTR (Wagemeyer System) into Compass Software now offer more details for editing.

read more
Ludger Ostendarp Wins German Table Tennis Championships

Head of development Ludger Ostendarp won the German Championships in Table Tennis in the category senior-55-double with his team partner Bernd Wuestenbecker at the beginning of June.

read more
Gereon Max Places 1. at TU Dortmund Campus Run

Head of service Gereon Max placed 1. in the age group M50 at the annual Campus Run, organized by the Technical University in Dortmund on June 1, 2022.

read more
Head of Service Gereon Max Rides Long Distance

Compass Software head of service Gereon Max recently biked 520 km (323 mi) with his team in only two days.

read more
Compass Software Installs Felder CNC Machine at Jakobi & Sons

Our service team has installed a Felder Profit H200 CNC machine with 4 axes at new customer Jakobi & Sons in Germany.

read more
Milena Schaefer Wins American Championships for the 2. Time and Sets New World Record

Compass Software Inc. General Manager Milena Schaefer won the USPA American Drug Tested Powerlifting Championships for the 2. time at the end of May.

read more
Compass Software Appoints 2. Executive Director

Compass Software, one of the leading specialists for CAD/CAM stair building software and CAM/CNC timber solutions, has appointed a second executive director.

read more
Industry 4.0: Installation of Reichenbacher ECO B with Robot at Aru Grupp AS in Estonia

Head of development Ludger Ostendarp recently installed a Reichenbacher ECO B CNC machine with parallel tables and a robot for fully automated processing at Aru Grupp AS in Estonia.

read more
9. International Stair Building Conference

Head of Sales Klaus Eilers exhibited at the 9. International Stair Building Conference in Biberach, Germany. The conference included topics such as increasing the quality of stair designs, creating…

read more
Compass Software at IKORO

Our colleagues exhibited at the IKORO on May 18, 2022. The IKORO is the industry and networking fair from the Technical College in Rosenheim.

read more
DDS Magazine Reports on MES System PROKON

The DDS magazine recently published an article on the MES system PROKON from Compass Software.

read more
Compass Software Goes Culinary

Finally, after long periods of remote work we can once again find more Compass Software employees in the office. We did not want to let this chance pass us by and have started occasionally cooking…

read more
New CNC Machine for Long-Term Customer Frammelsberger

The Compass Software Team connected a new CNC machine for the German stair builder G. Frammelsberger GmbH.

read more
Table Tennis Championships: Suspenseful Rivalry between Colleagues

Last weekend two of our employees faced each other at the West-German table tennis championships. Stanislaw Wrobel and Ludger Ostendarp delivered impressive game rounds.

read more
Trainee Sven Riese Successfully Completes Apprenticeship

Compass Software trainee Sven Riese has completed his apprenticeship to become an IT specialist with a focus on application development in only 2 years, instead of 3.

read more
HOB Magazine Reports on new Manufacturing Execution System (MES) at Alber

The Manufacturing Execution System (MES) PROKON was implemented at German stair builder Alber Treppensysteme GmbH in spring 2021. The HOB magazine reports on the project.

read more
Customer Brack Sun Rooms in dds

Compass Software customer Matthias Brack is part of the DDS column "Meinungen und Stimmungen aus der Branche - Und wie begeistern Sie?“, where he reported on the digitalization of his sun room…

read more
Customer Treppenbau.ch in the Press

Compass Software customer Treppenbau.ch AG was featured in the dds magazine, as well as the BM online.

read more
Polish Magazine for Woodworking Reports on Compass Software

The woodworking magazine Gazeta Przemysłu Drzewnego published an article on our Polish partners Robert Topka and Michał Suchorzewski, who have been cooperating with Compass Software for 23 years.

read more
Holzkurier Magazine Reports: MES Modul Implemented at Alber Stair

The Holzkurier magazine published an article in their year-end issue on the implementation of the Compass Software manufacturing execution system PROKON at Alber Stairs in Germany.

read more
We welcome Johann Strassburg to the Development Team

Johan Strassburg has been supporting the Compass Software development team since December 1, 2021.

read more
TreVe Stair Connector of Customer Kreuzberger in BM online

The patented TreVe stair connector, which was developed by Compass Software customer Kreuzberger was featured in the BM online magazine.

read more
Holzkurier Reports on Compass Software PROKON

The Compass Software Program PROKON for production management and control was presented in the November issue of the industry magazine Holzkurier.

read more
Automatic Control of HOMAG Labelling Machine

Compass Software Head of Development Ludger Ostendarp installed a new labelling unit at the machine manufacturer HOMAG in late September.

read more
Processing Multiple Sides on Posts

It is now possible to process posts from several sides with only one clamping with Compass Software.

read more
Compass Software at The Forum Wood Building in Cologne

Compass Software employees Martin Stockhausen and Svenja Stahnke visited the 14. European Congress (EBH) organized by the Forum Wood Building on October 20. and 21.

read more
Employee Milena Won Gold Medal at North American Championships

Milena Schaefer, General Manager at our Compass Software Inc., won the North American Championships in powerlifting.

read more
Compass Customer Kreuzberger Now Certified As Climate-Neutral

The German magazine dds reports: Compass Software customer Treppenbau Kreuzberger has been certified as a climate-neutral manufacturer by the Main Association of the German Wood Industry (HDH).

read more
SMA Staircraft Award Winners

The Stairbuilders and Manufacturers Association (SMA) once again announced this years StairCraft Award winners. One Compass Software customer won in two categories!

read more
Window Processor Installed at Melle Technical College

Our team is currently implementing the Compass Software window processor at the Melle College of Wood Technology.

read more
Congratulations to 60 Years Verschaeve

Compass Software customer Verschaeve Construct N.V. celebrated their 60. anniversary with an open house last weekend. Our team was there to congratulate in person.

read more
SMA Annual Conference

U.S. General Manager Milena Schaefer attended the SMA (Stairbuilders and Manufacturers Association) annual conference in late September.

read more
Open House at Verschaeve

Compass Software customer Trappen Verschaeve is celebrating their 60. anniversary with an open house. Visitors can view the robotic loading and our PROKON system on this day!

read more
Esther Hollinderbaeumer Starts as Working Student in Development

We are thrilled to welcome working student Esther Hollinderbaeumer to the Compass Software development team.

read more
New Member for the Sales Team: David Hollinderbaeumer

The Compass Software sales team has been supported by David Hollinderbaeumer since August.

read more
Live Report: Conturex Is Now Processing Curved Parts

The installation of the Weinig Conturex Vario L at Compass Software Estonian customer Aru Grupp AS` workshop goes into its 2. week. The Conturex is the first fully automatic throughfeed machine on the…

read more
Live Report: Installation of Weinig Conturex at Aru Continues

The installation of the Weinig Conturex Vario L at Compass Software customer Aru Grupp AS´ workshop continues. The Conturex is the first fully automatic throughfeed machine on the market that can be…

read more
Live-Report: Installation of New Weinig Conturex at Customer Aru

Head of development Ludger Ostendarp and Johannes Neth from the technical project management department are on-site at Compass Software customer Aru Grupp AS´ workshop in Estonia. There, the team is…

read more
New Service Technician Leonard Broeckelmann

The Compass Service has gained a new member. Leonard Broeckelmann has been supporting our service team since the beginning of July.

read more
Dietrich’s Neues! reports about our customer Taglieber Holzbau GmbH

Dietrich's publishes an article in this year's issue of its customer magazine Neues! about the perfect combination of Dietrich's CAD software and Compass Software's timber BTL processor at our…

read more
Holzkurier: CLT Special

Compass Software's innovative solutions for production management and control have been discussed in the CLT special edition of the Holzkurier.

 

read more
Fully Automatic Throughfeed Machine for Stair Parts

CEO Detlef Hollinderbaeumer, Head of Development Ludger Ostendarp, and developer Carsten Hoffmann have successfully carried through a factory acceptance test of a Conturex Vario L for stair parts for…

read more
Holzkurier publishes story on Compass Software Timber

The Austrian industry magazine Holzkurier published a story on the Compass Software timber processor.

read more
The Projects Team is Growing

The Compass Software projects team in South Germany has gained new support from Svenja Stahnke in mid-May. Svenja already has about 20 years of professional experience in the woodworking industry.

read more
Intern Jonas Knoefel Will Soon Begin His Apprenticeship at Compass Software

The Compass Software development team is currently being supported by Jonas Knoefel. Jonas already interned with us in 2017.

read more
Lea Borgelt – New Working Student in the Development Team

Working student Lea Borgelt has been supporting our development team since the beginning of May. Lea is studying Applied Computer Sciences at the Ruhr-University in Bochum in her 6. semester. Soon she…

read more
Working Student Jessie Zeukeng Supports Compass Software Team

Our development team is supported by Jessie Zeukeng since early April.

read more
New Working Student for Development Team

Abdullah Ourfali joined the Compass Software development team in early April as a working student.

read more
Trade magazine mikado reports on PROKON module

The trade magazine mikado reported on the Compass Software PROKON module for the production management and control in their March edition.

read more
Holzkurier Publishes Story on Compass Software Timber Solution

The industry magazine Holzkurier published a story on the Compass Software timber solution in their 15. issue (April 2021).

read more
Intern Candy Seen Off

We have seen off intern Candy Bolten after she completed her already second internship with the Compass Software service department.

read more
New: Custom Infills Possible

Custom infills for handrails and panels underneath a staircase are now possible with Compass Software. Users can create custom infills with perforated plates, pattern plates, or similar.

read more
We are welcoming intern Armen Petrosyan to the Service Team

Armen Petrosyan is doing an internship with the Compass Software Support for his trade school.

read more
Webinar: Designing a Round Stair in a Square Well

Our American branch office will be offering a free webinar on the topic of "Designing a Round Stair in a Square Well" on March 31, 2021 at 5 PM GMT.

read more
New Employee for the Compass Software Project Management

The Compass Software branch in South Germany got a new staff member on February 15, 2021. We are happy to welcome Johannes Neth to the team!

read more
Sebastian Baecker Completes Apprenticeship Program Early

Sebastian Baecker successfully completed his apprenticeship program to become an Information Technology Officer, after only 2.5 years.

read more
Treppen.de Awards Stair of the Year 2020

Once again the stair expert portal Treppen.de has selected the stairs of the year 2020. Several Compass Software customers have been chosen.

read more
Separation of Panel Templates into Individual Parts

It is now possible to separate panel templates for dry wall underneath a stair and/or handrail infills into several pieces.

read more
HOB Publishes Piece about Plate Optimization 2.0

The woodworking magazine HOB published an extensive story about the Compass Software Plate Optimization 2.0 module in their 11/12-2020 issue.

read more
Farewell to Gerald Feil

Early this year, we were dismayed at the news that our longstanding business partner and friend Gerald Feil had suddenly and unexpectedly died.

read more
We are Welcoming Salvatore Gandolfo to the Support Team

The Compass Software support team has gained another member. Salvatore Gandolfo has been supporting our service team since the beginning of the year.

read more
Candy Bolten Back at Compass Software for 2. Internship

Intern Candy Bolten has returned to the Compass Software support team for another internship.

read more
Posts with Support

It is now possible to draw posts with support in Compass Software. These are posts that seem to go through the tread visually, but consist of 2 separate parts.

read more
Magazine Holzkurier reports: Compass Software has "arrived" in the timber industry

The German magazine Holzkurier reported about Compass Software as a capable partner for timber and cross-laminated timber producing companies in their year-end issue (51-52/2020).

read more
The Industry Magazine BM Reports on Customer Kenngott´s Far-Reaching Sales Network

Longstanding Compass Software customer Kenngott Stairs has braced itself perfectly against crises with a clever distribution concept.

read more
BM Magazine Reports: Customer Meyer & Grave Successfully Runs Online Shop for Handrails

Compass Software customer Meyer & Grave Tischlerei GmbH has successfully been running an online shop for handrails for a couple of years now.

read more
BM online Features Impressive Project of Customer Hokon

The sticking stair built by Compass Software customer Hokon in Norway, was featured in the November edition of BM online.

read more
Holzkurier: CLT-Special 2020

The Holzkurier magazine is reporting on the highly efficient CLT joinery element module at our customer Hasslacher´s workshop in their current cross-laminated timber 2020 special edition.

read more
Mikado Web Award 2021 – Vote now!

The trade magazine mikado is giving out the Web-Award 2021 for the best website in the woodworking industry for the 15. time. Compass Software has also been nominated.

read more
Delicious Organic Compass Cookies: Fun Team Project with Much Creativity

Our fully equipped office kitchen is put to work. A few weeks ago, some of our trainees and working students banded together to bake some delicious cookies.

read more
Connection Drillings from Posts into the Ceiling

Compass Software now also allows for connection drillings from the post into the ceiling. The drillings can be positioned as individual drillings or drilling patterns.

read more
After-Hours Team Spirit

Video games make every developers´ heart beat faster. Well, at least that is the stereotype. And there seems to be something to it, since some of our employees recently organised a group gamer night…

read more
New Working Student for the Development Team

We have added a new working student to our development team. The name of this super woman is Spandana Matapathi.

read more
Up to 50% Digital Funding

The German Government is funding digital expansion programs with up to 50%. If you think you qualify for this program, please switch to the German language setting for more information or contact us…

read more
dds-Online Reports on TreVe-Stair Connectors Made by Customer Kreuzberger

The patented TreVe-Stair Connectors made by our customer Kreuzberger continue to cause excitement in the stair building industry.

read more
Jonas Wotzlawski is Supporting Our Development Team

The Compass Software development department has a new member! Jonas Wotzlawski is lending us his helping hand as a working student.

read more
New Trainee for the Development Team

We are delighted to welcome a new trainee to our development team. Nune Najaryan recently started an application development apprenticeship on top of her bachelor´s degree in software engineering.

read more
BM-online Reports on Interior Construction Project of Customer Tischlerei Strotmeier

Compass Software customer Tischlerei Strotmeier finished this modern and impressive interior construction project in Munster, Germany.

read more
General Manager Milena is National Champion in Powerlifting

We want to congratulate our General Manager Milena Schaefer for her victory in the American National Powerlifting Championships.

read more
Support for Our Development Team

A new wind of change in the world of IT: Hong Tram Pham has started an apprenticeship as an application developer in August 2020.

read more
New Trainee in IT System Management

We are happy to announce that we have a new trainee in IT system management on board, Meik Babinski.

read more
New Marketing Intern Eileen Rueckwald

Compass Software has a new intern. Eileen Rueckwald is assisting the company´s marketing department with current tasks.

read more
30 Years TACT Conseil

We want to congratulate our French dealer TACT Conseil to their 30-year anniversary.

read more
Compass Software CAM: Change in CAM for Format4 and Busellato

To make Compass Software's postprocessor even better compatible with Format4 and Busellato machines, there was a change in the program requiring your intervention.

read more
Compass Software has New Support

Compass Software has gained a whole flock of new talent in August.

read more
Project Assistant Jakob Unger Completes Familiarization Internship at Josef Friedrich Stair

Our new project assistant Jakob Unger completed an internship at long-time Compass Software user Josef Friedrich Treppenbau GmbH in Germany to make himself more familiar with the stair building…

read more
New Service Technician Christian Axtmann

The Compass Software Support Team has a new member. Christian Axtmann has been helping out customers for some time now.

read more
Error with Printer/Plotters after Windows Update

Cumulative safety updates that were published for Windows 10 on June 9, 2020 lead to severe plotter and printing problems for many Compass Software users.

read more
New Project Assistant for Our Branch in Southern Germany

Our branch in Bad Endorf (district of Rosenheim) has gained a new employee.

read more
Apply Now!

At Compass Software you have the chance to work as part of an international team. We offer many opportunities for further education and to gain valuable experience.

read more
Leveled Pockets for Clamping Screws

Compass Software now allows for the cutting of leveled pockets for clamping screws.

read more
Compass Software PROKON Solution as Cover Topic in HOB

Our customized solution for production management and control is the cover topic for the May edition of the woodworking magazine HOB.

read more
TV Report on Customer Ballert "How staircases are made"

Compass Software customer Holzmanufaktur Ballert e.K. was featured on the German TV channel SWR with a great report on "How staircases are made."

read more
Mikado 04/2020: Production Management and Control

The German trade journal Mikado reported on the Compass Software module for production management and control in their April issue.

read more
Covid-19: Our video message for you!

We have a video message for you: You can rely on Compass Software during times of Corona. We are still here for you. We will overcome this challenge together!

read more
Student Assistant Torsten Rotte Graduates with Bachelor of Science

Congratulations to our employee Torsten Rotte for successfully graduating with a Bachelor of Science (B.Sc.) in Information Technology.

read more
Stair Builder Wiehl Purchases DMC Wide Belt Sander

Compass Software customer Treppenbau Wiehl is featured with an interesting article in the German magazine dds - das magazin für möbel und ausbau. The stair builder is now in possession of a moder SCM…

read more
Winners for the SMA StairCraft Awards

We want to congratulate all of the Stairbuilders and Manufacturers Association Staircraft Award winners for their incredible designs.

read more
Compass Software Internship in Home Office

The Compass Software Service has a new intern since late March. Candy Bolten will be supporting our service department during her three-month internship.

read more
New Addition to the CS Development Team

Our development team gained a new member earlier this year. Sven Riese has joined Compass Software as a trainee to become an IT Specialist with a Focus on Application Development.

read more
BM Report: Stairs with Colorful Material Mixes

The German trade journal BM 04/2020 published a great story about stairs with material mixes.

read more
Customers Visit Customers: Lively Exchange of Information through Compass Software

At the beginning of the year, we accompanied our German customer Wiehl to our Belgian customer Verschaeve Construct N.V.

read more
Three Compass Software Customers Develop New Fire Protection Staircase

German Compass Software customers Bäthe Treppen, Franz Hasler AG, and Treppenbau Ihle have developed a new fire protection staircase that gives fist responders valuable additional seconds.

read more
Covid-19: We are here for you!

Dear Customers and Partners, due to the current situation we would like to ensure you that we are closely monitoring the latest developments regarding the corona virus and take these very seriously.…

read more
dds Reports on PROKON Ahead of HOLZ-HANDWERK 2020

The industry magazine dds published an article on the Compass Software PROKON solution.

read more
New Machine for Customer Kreuzberger

Our Service connected a new machine for German customer Treppenbau Kreuzberger in early February.

read more
Yoga for More Energy

Compass Software has been offering yoga session for employees since the beginning of the year.

read more
Compass Software Extended Executive Management

Compass Software, one of the leading specialists for CAD/CAM staircase manufacturing software and CAM/CNC timber solutions, extended its executive management with two additional members at the…

read more
Machine Manufacturer Fraxinus Reports on Automation at Trappen Verschaeve

The Belgian company Fraxinus reports in their newsletter about the collaboration with Compass Software and machine manufacturer MKM at Trappen Verschaeve.

read more
dds Publishes Story on CS PROKON Solution at De Vries Trappen

The German magazine dds published an article on the implementation of the Compass Software PROKON module at De Vries Trappen.

read more
We congratulate our customers for winning stair of the year 2019

The German online portal Treppen.de has awarded its Staircases of the year 2019 again. We want to congratulate our customers who won for their unique and impressive submissions. The winners were:

read more
Congratulations for Completing the Apprenticeship in Record Time

We are congratulating our “former” trainee Robin Valerius, who has successfully passed his state exam for becoming a certified IT Specialist with a Focus on Application Development.

read more
Wilfried Steinbeck Sent Off to Retirement

Wilfried Steinbeck is one of the true veterans of our company. He has been an indispensable team member since 1985, even before today’s Compass Software was founded.

read more
Christmas Party at Compass Software

We threw our annual Christmas party last week. Many coworkers, who work from home most of the time, travelled to our headquarter in Dortmund to be part of the festivities.

read more
Holzkurier Publishes Company Profile in Special Edition

The German industry magazine Holzkurier published an extensive profile on Compass Software in their special edition 45/2019.

read more
Special Edition Cross-Laminated Timber in Holzkurier

Fully automated production management and control at customer HASSLACHER NORICA TIMBER.

read more
New Talent for the Development Team: Christian Rotte

Our team is growing, since August 2019 Christian Rotte has been supporting the development team. The 29-year-old application developer from Eastern Germany, who turns good ideas into impressive…

read more
Holz-Zentralblatt Writes about Compass Spftware Customer Holz Keller AG

The Holz-Zentralblatt edition from Oct. 11, 2019 published a large story about our customer Holz Keller AG.

read more
Top Notch Performance

Our Head of Support Gereon Max participated in a half marathon on Oct. 3, 2019 and placed 1st in his age group. More than 2,150 runners conquered the 21 km (13.1 mi) running course in Dortmund,…

read more
We want to welcome Torsten Rotte to the Compass Software Development Team

For a while now Torsten Rotte has been supporting the Compass Software development team as a student associate. Next to his successful information technology major, Torsten is able to gain valuable…

read more
Plate Optimization 2.0 - More Efficiency with Less Effort

The German stair builder Treppenbau Voß GmbH & Co. KG has been using the Compass Software Plate Optimization Module 2.0 since December 2018. Since then, they have been able to achieve a utilization…

read more
Company Luxholm Upgrades with New Machines and Software Update

The company Luxholm Bauelemente Werk GmbH from Germany has been producing customized staircases and handrails, as well as affordable standard space-saver stairs, which, on request, can also be…

read more
Dry Wall underneath a Staircase

This module lets users utilize the empty room under the staircase and transform it into a new storage area. The module makes the creation of a matching dry wall underneath the staircase a breeze and…

read more
Processing of Diverse Parts Fully Automated with the BTL Processor

The company Holz Keller AG upgraded their already existing CNC center for joinery elements Krüsimatic with an additional Homag BMG 311. Manufacturing of furniture, doors, or staircases runs just as…

read more
Homemade Post Clamping Device for CNC Machine

Compass Software user Droomtrappen from the Netherlands recently built his own post clamping device for CNC processing. The machine-independent post clamping device was built in less than 1 hour and…

read more
Belgian Stair Builder Implements Robot to Increase Productivity

The Belgian family company Trappen Verschaeve has been producing stairs for almost 60 years. With the production of more than 2000 stairs annually, they are one of the biggest stair builders in the…

read more
Students at Melle College of Wood Technology Manufacture Staircase for Their Final Project

Three students at the German College of Wood Technology in Melle, Germany have manufactured an impressive wooden staircase for their final project in their class manufacturing engineering. To finish…

read more
Compass Software Plate Optimization 2.0

The magazine dds published a story on the Compass Software Plate Optimization 2.0: Nesting in Stair Building - No Waste Production.

read more
BM online Congratulates Customer Wortmann Treppen to Their 25th Anniversary

Our long-standing customer Wortmann Treppen is celebrated in the BM online for their 25th anniversary. We celebrate with them and are looking forward to additional future projects!

read more
BM online Features Customer Hokon

Customer Hokon is featured once again in the BM magazine. As usual a wonderful project and great story. Congratulations!

read more
New Installation at Dinkelholzbetriebe GmbH

Up until now, the company Dinkelholzbetriebe GmbH from Germany had been producing furniture with roughly 50 employees. At the beginning of this year they decided to venture into the stair building…

read more
Stair Connector "TreVe" Made by Compass Software Customer Kreuzberger Introduced in dds

Compass Software customer Treppenbau Kreuzberger´s patented stair connector "TreVe" was introduced in the German magazine dds.

read more
Free Running Oak Spiral Stair from Customer TRĄBCZYŃSKI

We want to congratulate our Polish customer TRĄBCZYŃSKI to this true piece of art. The free running spiral staircase made from oak can be admired in the London restaurant Piccadilly 85. We are in…

read more
First Installation for Technician Alexander at S u. W Wohn-Holz

Compass Software technician Alexander Huebner successfully completed his first installation at our customer S u. W Wohn-Holz’s wood shop in Saxony, Germany. Even though Alexander has only been a…

read more
Compass Software Connects New Machine at Trappentoko

Jeffrey Pels, owner of Trappentoko, and his team are successfully producing staircases for the Dutch market. The young company has been able to achieve a steady growth since its founding, which was…

read more
Window Manufacturing Workshop

We invited the window manufacturing expert Dittmar Siebert to give a comprehensive advanced training for our team at the beginning of November. The specialist is one of the most renowned experts in…

read more
SMA Workshop Tour at Loudoun Stairs in Virginia

Compass Software technician Steven attended the Loudoun Stairs workshop tour at their premises in Purcellville, VA in September. Loudoun Stairs has been using our staircase software program since…

read more
DREMA 2018 in Poland

Compass Software sales representative Jens Eckert and our Polish dealers Robert Topka and Michal Suchorzewski exhibited at the DREMA 2018 in Poznan.

read more
New Trainee for the Development Team Robin Valerius

Our development department has also gained another apprentice, Robin Valerius. Robin started his trainee program to become an IT specialist with a focus on application development in August as well.…

read more
New Service Team Member Sebastian Baecker

Our Service Team is now supported by our new trainee Sebastian Baecker, who started working at Compass Software in the beginning of August. The Dortmund native is training to become an information…

read more
IWF 2018 in Atlanta

The IWF 2018 in Atlanta, GA was a full success. Our Atlanta based team represented Compass Software at the trade fair. Many of our U.S. and Canadian customers and industry experts visited us at our…

read more
Developer Brigitte Streicher is Retiring

Our development team member Brigitte Streicher entered into retirement at the end of July 2018. The mathematician had been working for us in Dortmund, Germany since November 2006. During her…

read more
New CNC Machine for Carpentry Kleeberg

One of our support technicians installed a new Maka PE 90 5-axis machine at our longstanding German customer Carpentry Kleeberg´s workshop at the end of July. The new machine will take the place of a…

read more
Our New Trainee Is Here!

Our new trainee, Abdullah Orabi, has been supporting the Compass Software Development Team since Monday. Abdullah originally comes from Syria but has been in Germany for three years now. After…

read more
Installation of Staircase Production Solution at Carpentry Köhler from Germany

Our Service Team installed the Compass Software Staircase Solution as part of a bigger project at the company Köhler from Germany in June. Besides the CAD Software, the technician also connected a 5…

read more
We Have a New Intern

We would like to welcome Franck Horvat, who has been supporting our team since Monday. Franck will be completing a six-week internship as part of his wood engineer university major. He will be…

read more
CAD/CAM Installation at Carpentry Alfred Petersen

Our new customer Alfred Petersen Bau- und Möbeltischlerei from Germany has been making staircases for a long time. Up until now they drew these staircases with the Wagemeyer-System and then printed…

read more
Optimization Coaching at Walter Donkers in the Netherlands

Our Service Technician Gereon Max visited customer Walter Donkers from the Netherlands for an optimization coaching. Walter Donkers has been using the Compass Software Staircase Software Program for…

read more
Automated Production at Customer ATAB in Sweden

The current HOB edition (05/2018) published an extensive story on our long-standing customer ATAB Trappan AB from Sweden. The article is focused on automated processing in the stair building workshop,…

read more
Machine Installation at Haas in Germany

Our Service Team connected a new SCM machine with Compass Software at Haas Fertigbau GmbH, a stair builder from Bavaria, Germany. The company previously utilized the Wagemeyer-System, but decided to…

read more
In-House Trade Fair at Meyer & Grave

In April, our Sales Representative Hermann Hasebrink exhibited at the in-house trade fair our longstanding customer Meyer & Grave hosted in Germany. Many industry experts visited the event, amongst…

read more
Smart Solution

Compass Software customers are creative and curious; they try to make use of all aspects of the staircase software to get the most out of it. Customer Juergen Scherner from Reuss in Germany found…

read more
Connection of New Post Machine at K. van Sambeek B.V.

After installing a SCM Accord 25 last summer, our service once again visited the company K. van Sambeek B.V. in the Netherlands. This time Compass Software connected a Houfek post machine.

read more
New Installation at Jenniches Stairs

Our service conducted a new installation of the Compass Software program for our customer Jenniches Treppen from Germany. Jenniches had been using the Wagemeyer System before, but decided to switch…

read more
Employee Milena Wins Gold at GA State Championship

Strong performance: our Atlanta employee Milena Schaefer won first place at the Georgia State Powerlifting Championships in the weight class 84+ kg last weekend. The powerlifting competition tests the…

read more
Installation of Second Machine at Carpentry Schramm in Germany

Our service recently connected a second CNC machine with Compass Software at the Carpentry Eugen Schramm in Germany.

read more
CAM Installation in Poland

Our service recently installed our CAM solution at the customer Przedsiębiorstwo Handlowo-Usługowe “Balsa” Spółka z o.o.’s premises in Poland. The software was installed on a Reichenbacher Vision CNC…

read more
CAD/CAM Installation for New Customer Aro Trappen

We installed our CAD/CAM Stair Construction Software at the location of our new customer Aro Trappen in the Netherlands late last year. The customer, who had already been using the Wagemeyer System in…

read more
Presentation at Technical College in Germany

Sales Representative Hermann Hasebrink held a presentation in front of approximately 25 students who are enrolled in a wood technician program.

read more
Compass Software Staff Celebrates 25. Anniversary

As you might have heard already, we are celebrating our 25th anniversary this year. Our staff did not want to miss this opportunity either. On December 14, 2017 we invited everyone to an exclusive…

read more
One Day CAD/CAM Consultation at Sonnemans Stairs in the Netherlands

Our Service Technician Gereon Max visited our customer Sonnemans in the Netherlands for a one day CAM training.

read more
CAD/CAM Training at Flin in France

Our service has conducted an extensive training at the company Escaliers Flin S.A. in France. During the one week visit, the team optimized several production processes. Furthermore, our technician…

read more
New Post Processor and Optimization Coaching for Comfort Trappen

In September, our Service installed a new post processor for the upright processing of handrail parts on a Reichenbacher CNC machine built in 1996 at Comfort Trappen in the Netherlands. The age of the…

read more
Compass Software Support Now Also in Dutch

As part of our continual quest for professional development, our employee Gereon Max successfully completed a week-long intensive language learning course in Dutch.

read more
Compass Software Receives Honorary Certificate for 25. Anniversary

To celebrate 25 years of Compass Software, Chamber of Commerce representative Mrs. Preiss, awarded CEO Detlef Hollinderbaeumer with an honorary certificate to commemorate the company’s anniversary. We…

read more
Compass Software is celebrating 25th anniversary

25 years ago our company was founded.

We are filled with pride when looking back on 25 years of successful company history!

read more
Online Installation of CS Wreath at Carpentry Mike Altmann

Our customer Altmann from Germany upgraded his processing of wreaths from horizontal processing to the CS wreath technique. The installation of the module was conducted online. We want to thank…

read more
125. Anniversary at Falkenberg in Norway

Our partner A. Falkenberg Etft. AS from Norway, celebrated their 125. anniversary in October 2017. In honor of this occasion, Falkenberg organized a four-day long in-house trade fair in Norway. Of…

read more
User Meeting in Austria and In-House Fair at Handl Machines

The Company Handl Machines from Austria organized an in-house fair in mid October this year. Of course Compass Software was there to exhibit.

read more
First Machine for NHG

The company NHG UG & Co. KG from Zetel-Neuenburg in Germany, has been using Compass Software to build staircases for many years already. Now the company decided to upgrade their shop with the purchase…

read more
User Meeting in the US

Our Atlanta office hosted a user meeting for our American and Canadian customers last week. Users had the opportunity to exchange ideas and experiences with users from other companies at the event, as…

read more
New Workshop and New Machine for Franz Hasler AG

The Franz Hasler AG from Lichtenstein has been a Compass Software customer for many years. Two of the company’s specialties are environmentally sustainable timber construction and solar technology.…

read more
CAM/CNC Software Package for Customer Horák from the Czech Republic (Kopie 1)

Compass Software customer Shody-Horák Jiří from the Czech Republic, has been using our CAD solution since 2009. Earlier this year the customer purchased a 4 axis Felder machine.

read more
Successful Completion of Installation at HTL Rankweil in Austria

he Höhere Technische Bundeslehr- und Versuchsanstalt Rankweil (Technical College in Rankweil, Austria) has been using Compass Software’s CAD solution for educational purposes for some years. Now they…

read more
New Customer H.B. Millwork Inc. in New York Area

Our US based Service Technician recently set up a complete software package for our new customer H.B. Millwork Inc. who is based in the New York area.

read more
Installation of 3. Machine at our Polish Customer Chudzinski

Our Service Team sucessfully conducted an installation at our Polish customer Chudzinski’s workshop. Chudzinski has been using Compass Software through our Polish dealer since 2008. Our team connected…

read more
The HoloLens at AWFS in Las Vegas

Sales Representatives Martin Stockhausen and Hermann Hasebrink presented Compass Software at this year's AWFS Trade Fair in Las Vegas, USA. Some of our customers visited us at our booth, but we also…

read more
Installation of third machine at K. van Sambeek B.V.

Our Service Department successfully completed the first part of an installation for a new SCM 5-axis machine at our customer K. van Sambeek B.V.’s workshop in the Netherlands. The customer Sambeek has…

read more
Workshop Tour at Heartland Stairways

Sales representative Hermann Hasebrink attended the event at our customer´s Heartland Stairways workshop in the US, which was part of the SMA´s (Stairbuilders and Manufacturer´s Association) National…

read more
Processing of Mouldings with Plate Optimization

Mouldings on tread front edges can now be arranged and manufactured with plate optimization. Some manufacturers mill the mouldings in strips, which means after one strip is cut, the machine operator…

read more
Fusion of Handrails

CS-wreaths can be fused with straight handrail parts. Wreath sections with different radii can be combined and separated at user-defined positions as well. When designing circular or curved stairs,…

read more
Machine Table Arrangement for CS Wreaths

It is now possible to mill several CS wreaths at the same time via machine table arrangement. Several blocks can be fixated on the table and processed at the same time. This work process results in…

read more
Saving of Time: Rabbet Cuts for Open Stringers

Compass Software makes it possible to mill rabbet cuts on open stringers much faster than before. When using this method, the rabbet cut is milled with a much bigger tool, however, the resulting messy…

read more
Installation of Sun Room Module at SAYYAS in China

The Compass Software team installed the 4. machine for building sunrooms at our customer SAYYAS in China. SAYYAS has been using Compass Software since 2013 and since then we have already connected two…

read more
Presenting the HoloLens at Ligna 2017

Once again we are able to look back at a successful trade show week at this year's LIGNA in Hanover, Germany. Many of our customers, partners, and industry experts visited us at our booth. Even some…

read more
Staircase Construction with Augmented Reality

Compass Software makes it possible to view staircases with AR (Augmented Reality). Watch our YouTube Video here!

read more
The Exact Initial Calculation of Staircases Has Been Integrated

The initial calculation of staircases has been improved as a result of the cooperation with Anton Wagemeyer. The winding of most European standard staircases is now already calculated optimally at the…

read more
Integrated Laser Measurement for Everyone Thanks to Bosch and Compass Software

The company Compass Software has integrated the Bosch Laser Measurement Tool GLM 100C into their staircase construction software.

read more
New Fittings for Suspension on Well

Starting with the new version, a new fitting for suspension on the well has been integrated. This fitting is used when a staircase's last or second to last tread from the exit is suspended from the…

read more
Integration of Brackets on the Well

The new bracket for wells is used to mark-off the exit tread from the ceiling covering but is also used as a support for the balcony railing at the same time. The steel bracket is constructed around…

read more
Spiral Staircase without Newel

It is now possible to construct spiral staircases without newels. This was not possible before. A bolted staircase without newel such as this, has a steel handrail or similar construction in the…

read more
Suspending Staircases below the Well

It is now possible to suspend staircases from the well. This makes the handrail at the exit obsolete. A well slat is installed on the well hole, which can hold the balusters. In turn the balusters…

read more
Automatic Matching of Bolts with Wall Materials

With the new version it is possible to define which bolts are to be matched with what kind of wall material. Users are able to enter in the predefintions which bolts are to be used automatically when…

read more
New Warning Message for Tread Measurements

Sometimes tread geometries have to fulfill certain measurements for some processes, otherwise they cannot be produced (e.g. because of machine sizes). Therefore, certain tread distances cannot be out…

read more
New Standard Part: Spacer with Hinge

Spacers with hinge are now possible as a connection between the post and the handrail. The spacer with hinge can be assigned automatically through the drilling patterns as soon as it is added as one. …

read more
Rectangular Bolts

Previous version only allowed for round bolts as horizontal fittings. Now it is also possible to use bolts which are rectangular.

Version 10.8.15.0 and up.

read more
Installation of Post Machine at Vos Zwolle B.V.

Our Service recently installed a new post machine at Vos Zwolle B.V. in the Netherlands. The company Vos replaced their old post machine with the new Houfek machine and stayed loyal to the Compass…

read more
Workshop Optimization and Special Programming at MTT

Compass Software installed a new system for workshop-optimization at the German company Meister Treppentechnik (MTT) at the turn of the year.

read more
Martin Stockhausen exhibits at SMA Annual Conference

Sales Representative Martin Stockhausen once again exhibits at the Stairbuilders and Manufacturers Association (SMA) annual conference this year. The event took place in Tuscaloosa, Alabama from March…

read more
Machine Installation at Konijn in the Netherlands

Our service installed a second 5-axis machine at our customer’s Hans Konijn Houtbewerking premises in the Netherlands. The company is specialized on making complicated staircases and produces…

read more
A Powerful Duo: Compass Software has Partnered with Wagemeyer’s Development Team

We welcome our new asset: The development of Compass' Staircase Solutions is now supported by the former Wagemeyer GmbH, chief competitor from the get-go.

read more
Good Job!

We would like to congratulate Eva Mueller for passing her bachelor exam with the highest grade possible! Eva completed her dual studies program at Compass Software and the University of Applied…

read more
New Customer Sobczak in Poland

We are happy to be able to present another happy customer. Support has installed a new machine at our new customer Sobczak in Poland a couple of weeks ago.

read more
Compass Software now integrates Virtual Reality Technology

The realistic experience of staircases and their actual premises is possible in Compass Software via virtual reality headset! This represents a new way of giving realistic presentations. Virtual…

read more
Machine Set-Up in Belgium

The Compass Software Service sucessfully installed a new 5-axis processing center (Houfek) for our new customer Trappenmakerij Wim Van Loom in Essen, Belgium last week. Before the customer only worked…

read more
New Corporate Design for Compass Software

Compass Software's trademark was left unchanged for almost 25 years. It was time to rejuvenate the logo. Of course the intend was not a complete rebranding, therefore a more modern and fresh look was…

read more
Plate Optimization of Return Nosings

Customer Service recently set up our new option for plate optimization of return nosings at Capital Wood Rails Inc. and JMP Wood Stairs & Rails in NY. The complete set of return nosings can be…

read more
Machine Installation for Stairtech Inc. in Canada

Another satisfied customer! Service successfully installed a machine for Stairtech Inc. in Canada last week. We are looking forward to future projects with Stairtech Inc.

read more
Development Workshop at Compass Software

We at Compass Software are constantly trying to improve ourselves. We know that we are at our best in working innovatively for our customers when we function as a team. Therefore, our development team…

read more
Customer Terhalle prints In-Situ Concrete Staircase in 3D with Compass Software

German customer Schreinerei Terhalle GmbH & Co KG created several staircases via 3D print on a scale of 1:25 and 1:100 for two of their current orders. The construction of the staircases, as well as…

read more
In-House Trade Fair at Papenbroock

German Head of Sales Klaus Eilers exhibited at the in-house trade fair of the company Papenbroock (10/28 - 10/30/2016). Attendance was great. Klaus had the opportunity to speak with many of out…

read more
Success at W16 in Birmingham

Once again we are happy to look back onto a successful trade fair period. Our Sales Representatives Jens Eckert and Juergen Gerdt are pleased with the outcome.

read more
Import or Drawing of Customized Balusters

Compass Software allows users to import balusters from different manufacturers via DXF data or draw them individually. The balusters can be saved in the software and are displayed correctly in the 3D…

read more
New Extension for Free Form Pockets Integrated for Option External Staircase Plus

​The extension free form pockets enables users to import existing free form pockets in treads. Furthermore, it is possible to add pockets via the free form construction later. This extension has been…

read more
A Retrospect of the IWF 2016 in Atlanta

​This year’s IWF was a full success. Our sales representatives were busy showing off our software and presenting Compass Software’s special trade show offers. We would like to thank the many customers…

read more
CAD Training for WH Stairs in Chicago

Compass Software’s new U.S. customer service employee Steven Chiu, conducted his first training at WH Stairs in Chicago. Steven familiarized the customer with the CAD software over the course of four…

read more
New Member Reception GACC South 2016

Sales and Marketing Representative Milena Schaefer welcomed this year’s new members of the German American Chamber of Commerce of the Southern US in Atlanta. Next the German food and contact to German…

read more
SMA Workshop in Keene, New Hampshire

Martin Stockhausen exhibited at the most recent stop of the SMA nationwide workshop tour at King and Company Architectural in Keene New Hampshire. The workshop was a full success and Martin was able…

read more
New Handrail Parts Processor Implemented in the U.S.

Service Technician Daniel Bank traveled to our customer Compleat Stair in Kennesaw, GA. There Daniel put Compleat Stair’s new machining center into service. After only a few days, the machine is now…

read more
Upright Processing of Handrail Parts

The processing of handrail parts (cappings, volutes, goosenecks, easings) is now fully integrated into the current CNC processor. As a result, it is possible to optimally customize the full range of…

read more
Wood Expo Shanghai, July 5. - 7, 2016

Sales Representative Hermann Hasebrink supported our Chinese Partner at the WoodExpo in Shanghai last week. While being in China, Hermann had the opportunity to join and experience the Chinese…

read more
New Sunroom Post-Processor Installed in China

Service Technician Alexander Doerr successfully set up his first sunroom post-processor for one of Compass Software’s customers in China. Alexander (third f.r.) connected the SCM Machine in…

read more
Atlanta Office Is Growing

As of May 16, 2016, we have hired Steven Chiu as our first Technical Customer Service Specialist at our Atlanta office.

read more
Compass Software Records Best Fiscal Year in Its Company History

Compass Software, leading provider of staircase construction software, can proudly look back on the last year. 2015 was the most successful year in company history to this date. The software company’s…

read more
Mission Possible: Fighting Stress

Working in today’s business world can be tough! People burn out and everyone tells us how they stress in order to juggle personal life and work. That’s why it is important to us to create incentives…

read more
New Memeber of Our Development Team

Our development team has gained some support: We're pleased to welcome Samir Rabbasy, the newest member of our team! Samir already has several years of experience in the field of IT engineering and…

read more
SCM Distributor Open House April 26 - 28, 2016

Our Sales Representative Juergen Gerdt attended the SCM Distributor Open House in Nottingham, GB last week. He was there as a representative of Compass Software and had the chance to showcase our…

read more
Bringing Life to Our Atlanta Office

Compass Software founded a U.S. subsidiary, Compass Software Inc, last year in February. Since then we have constantly been working on establishing our own office in Atlanta, Georgia. After…

read more
The SMA Annual Conference in San Antonio, TX

Our Sales Representative Martin Stockhausen attended the SMA Annual Conference in April, as well as exhibiting Compass Software there. The event was very successful and due to the great interest he…

read more
CAM Timber Elected as BEST OF

Our CAM/CNC Software Solution for Timber Construction was Awarded BEST OF 2016.

read more
LED CAD/CAM Light Solution

LED CAD/CAM Light Solution – makes it possible to place different lights (round, square, or rectangular) into the stringers. Fruthermore, there are light strips, which can be placed on treads (in…

read more
Photo-realistic 3D Visualization

Photo-realistic 3D Visualization - the professional high-end substitution for the prervious 3D solution. 3D models can be turned into high quality photos in the blink of an eye. The creation of…

read more
Holz-Handwerk 2016, Nuremberg

This year´s Holz-Handwerk can be described as a positive event through and though. We were able to present ourselves with our new trade fair booth, which reaped many compliments from the visitors.…

read more
Innovation Award-IT 2016

CAM-Timber, our CAM/CNC software solution for timber construction, has been qualified for the INNOVATION AWARD-IT 2016!

read more
WMS 2015

The Woodworking Machinery & Supply Conference and Expo 2015 in Toronto, Canada (WMS 2015) has been a full success. Our sales representatives Martin Stockhausen and Hermann Hasebrink were able to…

read more
Windows 10

​Beginning with new version 10.8.0.17, it is now possible to use Compass Software with Windows 10. Furthermore, the software now supports 4k high definition monitors.

Version 10.8.0.17 and up.

read more
Successful Implementation of the New BTL Processor

A new joinery element processor from Compass Software GmbH has recently been put into service for the company Keller in Switzerland.

read more
Double Infills

​Starting with version 10.7.11.0 it is possible to create double infills. These are combinations of ranch railings and glass infills. They can either be constructed next to each other or on top of…

read more
New Major Project in the Netherlands

The company VIOS Trappen has decided to let Compass Software GmbH control their entire manufacturing of 15,000 staircases each year in the future.

read more
Staircase Configurator Launched on Treppen.net

As of late you can also find our staircase configurator on the staircase portal www.treppen.net.

read more
Ligna 2015

Many visitors came to see the CS booth. Once again Ligna 2015 was a great success. Next to a number of new potential buyers, we had the pleasure of welcoming many of our existing customers at our CS…

read more
Compass Software
19. May 2024 – 22. May 2024 Events, Trade Fairs Materials & Finishes Show

NEC, Birmingham

Booth N80

The W Exhibition has officially relaunched as the Materials & Finishes Show. "Materials & Finishes Show is the UK's primary platform for carpenters, joiners, machinists and installers to see running woodwork machinery, the latest materials, components, software, tools and innovations for the woodworking sector." Compass Software will be exhibiting as usual. We are looking forward to seeing you there!

Trade Show Homepage

Compass Software
21.05.2024 -24.05.2024 Events, Trade Fairs Xylexpo 2024

Compass Software will be exhibiting from 21.05.2024 -24.05.2024 at the Italian trade fair Xylexpo in Fieramilano at the SCM booth in Hall 3. 

You can also find more information about the trade fair and the offer at SCM here.

We look forward to seeing you!

Trade fair homepage

 

Compass Software
06. August 2024 - 09. August 2024 Events, Trade Fairs International Woodworking Fair (IWF)

Georgia World Congress Center

Building B · Booth B4338

Compass Software once again will exhibit at the IWF in Atlanta. The IWF is the largest showcase of machinery, materials, supplies and services in North America for woodworking and related industries. We are looking forward to showing you our newest features in Atlanta!

Trade Show Homepage

Flight and Hotel Discounts

Compass Software
04. December 2024 - 06. December 2024 Events, Trade Fairs IHF Innsbruck

Kongresszentrum Innsbruck

Compass Software will be exhibiting at the Forum Woodwork in Innsbruck as every year. The topic of the forum is once again "Practical experience – Practical application". We are looking forward to seeing you there!

Forum homepage